Our free extension takes your cabinets apart into individual boards (or works them out from a plain box) and sends them, with materials and edge banding, from SketchUp straight to the FOCO cut list. No exporting, no retyping, and your price appears as soon as it opens.
Draw your cabinets from boards at their real thickness and paint each with one of our stock materials. Boards can be separate parts, or all inside one cabinet group: we find them.
Use the Paint Bucket on the narrow faces with a material called “Edge” (add 1mm or 2mm for the tape). Unpainted edges stay bare.
Choose Extensions → FOCO Workshop → Send to FOCO cut list. Check the summary and press OK.
Your browser opens the cut list with every part filled in. Match any materials, adjust anything you like, and order.
The extension has our full stock list built in. Add the boards you’re using to your model as materials, paint your cabinets with them, and the decor codes fill in the cut list for you. No matching step.
We cut flat boards on a panel saw, so the model has to be made of plain rectangles. Two rules cover nearly everything.
Draw every board as a simple rectangle: no toe-kick notches, no curves and no cut-outs. UK cabinets stand on legs, so the sides run the full height with square ends. A board with a notch is sent as its full overall rectangle, we flag it, and we can’t cut the notch.
Draw each plinth (kick board) as one board, not in several pieces. If it’s split, it comes through as several boards and the extension warns you. Make it one board that runs the full length of the cabinet, or of the run.
Before you send, delete everything that isn’t a carcass board: walls, floors, rails, worktops, appliances, handles and anything else in the scene. Or select just the cabinets and send the selection. Anything left in the model can come through as a part, and it may be cut in wood.
You only do this once.
↓ Download foco-workshop-sketchup.rbzKeep the file as .rbz. Don’t unzip it.
A preview of a new way to send a model. Our boards fill SketchUp’s Materials automatically. Paint your panels with them, in the right thickness, and the cut list opens with every part already on its board.
Preview · update 2, 10 November 2026 · SketchUp 2017 or newer, Windows and Mac · needs an internet connection
Step-by-step install and user guide, with screenshots: read it online or download it as a PDF (11 pages, 1.7 MB).
SHA-256 58217c25b028f79fc6edfaeb0a4abe1f698880795872c408bf018dd2172f6ca5
Based on OpenCutList 7.1.0by L’Air du Bois, licensed under the GNU GPL v3. Our changes are readable Ruby source inside the download, with notes in FOCO-BUILD.md.
No. The extension is free, and sending a model doesn't need an account. You only pay when you place an order for cutting.
The desktop version of SketchUp on Windows and Mac. SketchUp for Web doesn't support extensions, so use the spreadsheet route below instead.
Only a list of parts: each panel's name, material name, thickness, length, width, quantity and any edge banding. Your model file is never uploaded. The list is held for 24 hours so your browser can open it, then deleted.
Yes. Select the objects you want before choosing Send to FOCO cut list. With nothing selected, the whole model is sent.
Yes, if the boards are drawn inside it at their real thickness. The extension finds the sides, bottom, top, shelves, rails and back from the shape of the solid and cuts each one out, including the painted edges. If boards are fused face to face into a block thicker than 50mm, such as a worktop glued onto a rail, the extension warns that some boards may be missing. Check those against your model.
Yes. There are no boards to read, so the extension sends each box's size and a guess at its type: tall if it is 1500mm or more, wall if it hangs more than 900mm off the floor, otherwise base. When the cut list opens you get a short review: untick anything that isn't a cabinet (appliances are unticked for you), correct the type, size or shelf count, and our cabinet calculator turns each one into boards. It uses standard frameless construction, with sides running full height, the front edges banded, and doors and worktops left out. Every row stays editable.
We cut plain rectangles, so draw boards without them. UK cabinets stand on legs, so the sides run full height with square ends and a separate one-piece plinth goes across the front. If a board isn't a plain rectangle, the extension sends it as its overall rectangle and tells you which boards, so you can fix the model first. For genuinely shaped parts, get in touch and we'll quote them separately.
No, any material works, but using ours skips a step. Add the boards you want from Extensions, FOCO Workshop, Add stock materials, then paint with them. The decor code in the name is read automatically, so nothing needs matching when the cut list opens. With any other material name, you pick the board for each one on the site.
Plain MDF (Medite and Finsa, 6 to 25mm) is bought in its own section of the cut list, where we choose the cheapest mix of sheets. Add an MDF material from the stock list and paint those parts with it. When you send, they go into the MDF section with their thicknesses instead of the cut list. That section prices one MDF product at a time, so use one MDF material per order, and check the product when it opens. MDF parts have no edge banding.
Everything that isn't a carcass board: walls, floors, rails, worktops, appliances, handles and any other scenery. Or select only the cabinets before you send. If something is selected only that is sent, otherwise the whole model is, and anything left in may be cut in wood.
If you paint no edges anywhere in what you send, yes: the front edge of each side, top, bottom and shelf inside a cabinet is banded at 1mm, because that is how most cabinets are made. The back, rails and plinth are left bare. The send box in SketchUp tells you and lets you switch it off. If you paint any edge with an Edge material, we use only your painting. Either way, every row stays editable on the cut list.
It will come through as several boards, and the extension warns you that a cabinet has a plinth in several pieces. Model each plinth as one board instead, so the cut list has one plinth line and the carpenter cuts it once.
No. When the cut list opens it lists each material it didn't recognise and you pick the matching board once. Every part using that material is updated. If you name materials with our decor codes (for example W1000-ST9), they match automatically.
Yes. It's the normal FOCO cut list, so you can edit, add or delete any row, change edging, and see the price update as you go.
On SketchUp for Web, or prefer not to install anything? Export a cut list from SketchUp as a CSV or spreadsheet with a cut-list extension such as OpenCutList, then press Import Cut Liston the cut list page. It needs material, length, width and quantity columns, and you’ll match any materials the same way.
Open the cut listCall the workshop and we’ll talk you through it.